Electromagnetics in COMSOL Multiphysics: AC/DC

Register for COMSOL training onlineCOMSOL_Certified_Consultant


City: Columbus, OH


May 7, 2019

September 10, 2019

November 12, 2019


Organization: AltaSim Technologies

130 East Wilson Bridge Rd, Suite 120

Columbus, OH 43085




This one-day course provides an introduction to the fundamentals of performing analyses of AC/DC electromagnetics using COMSOL Multiphysics. It is expected that participants will have a working knowledge of COMSOL Multiphysics before attending. AltaSim’s instructors will draw on their experience as COMSOL Certified Consultants solving a wide range of problems on a daily basis to teach you the practical aspects of performing realistic analysis of electromagnetic problems. The course will introduce the fundamental governing Maxwell equation for electromagnetics and how they are implemented in COMSOL Multiphysics. Participants will understand the important material properties required for accurate simulation of AC/DC electromagnetic phenomena and how they are used. The unique boundary conditions and mesh refinements required for AC/DC electromagnetic analyses will be discussed in detail. Specific application to a range of models will be presented and supplemented by demonstration for different conditions of interest to engineers developing AC/DC electromagnetic analyses. On completion you will be proficient in setting up and solving analyses of a wide range of AC/DC electromagnetic problems using COMSOL Multiphysics.


The cost of this one-day course is $800 per person.

Who should attend

This course is intended for people who wish to analyze electromagnetic wave phenomena using COMSOL Multiphysics. It is expected that attendees will have an existing knowledge of the structure of COMSOL Multiphysics and will possess a relevant engineering, physics, mathematics or science background.

Day 1, 8:30am – 5:00pm

An initial overview will be provided of the governing equations of electromagnetics and the relevant material properties required for numerical analysis. Detailed consideration will be given to the selection and implementation of the relevant boundary conditions required for accurate analysis. At the end of Day 1 participants will have an understanding of the following items:

  • Fundamental governing equations of electromagnetics
  • Required material properties
  • Selection of general boundary conditions for electric and magnetic field
  • Best practices for selection of mesh refinement
  • Application of infinite elements
  • Calculation of critical parameters in the analysis of AC/DC electromagnetics



Instruction will be performed by experienced engineers who use COMSOL Multiphysics on a daily basis to solve real world problems. Among the instructors will be:

Sergei Yushanov:

SergeiYushanovSergei has over thirty years experience in computational analysis and specializes in analysis of problems relating to electromagnetic, vibration, plasma and acoustic phenomena, structural, piezo-electric, and heat transfer. As a Senior Engineer at AltaSim he has been instrumental in the development and application of multiphysics analysis to problems in the Automotive, Aerospace, Medical Products, Consumer Products, and Energy markets.



Josh Thomas:

JoshuaThomasWith over eight years of computational analysis experience, Josh has a graduate level training in computational mechanics modeling specializing in microstructural analysis. As a Research Engineer at AltaSim, he plays a vital role in developing solutions to a wide range of multiphysics problems using COMSOL. He has been integral to the development and teaching of both COMSOL Multiphysics and SpaceClaim courses at AltaSim.


For registration and further information please e-mail or call Lynne Smith at 614 861 7015 x10. Early registration is encouraged as the number of participants is limited.


Course Confirmation

Upon registration you will receive an e-mail confirmation of your reservation, directions to the course site and information on local accommodation.

Course Hours

Training will take place between 8.30am and 5.00pm, check-in is open from 8.00am. Lunch and refreshments during the morning and afternoon sessions are provided.

Payment Methods

Payment should be provided in advance and can be made by Visa, MasterCard, PayPal, company purchase order or check. For security purposes we do not accept credit card information by e-mail, but we have an electronic payment system for your convenience.

Please mail payments/purchase orders to:

AltaSim Technologies
130 East Wilson Bridge Rd, Suite 140
Columbus, OH 43085

Please fax purchase orders to:

AltaSim Technologies
ATTN: Training
614 861 7534

Cancellation Policy

Please note that your seat in the course can not be confirmed until payment or a formal purchase order have been received. Instructor-led training tuition is fully refundable if we receive written notification (via mail or e-mail) of cancellation on or before seven business days prior to the class. Cancellations made less than seven business days prior to class will be charged 50 percent of the course tuition fee. If you fail to show up to class without written notice, you will be charged the full tuition. You may send a substitute in your place to avoid a fee.

Training Inquires
Frequently Asked Questions
How long does it take to complete S3?
Study and Simulate are a function of Solve. The scope and complexity of the required solution will determine the time required to identify the root causes, isolate the critical parameters, and develop cross disciplinary/multifunction solutions that provide sustained benefit.
More FAQ’s
To view all the faq , click here