City: Columbus, OH
Organization: AltaSim Technologies
130 East Wilson Bridge Rd, Suite 120
Columbus, OH 43085
The Electromagnetics in COMSOL Multiphysics (RF) course provides an introduction to the fundamentals of performing analyses of RF electromagnetic wave phenomena using COMSOL Multiphysics. It is expected that participants will have a working knowledge of COMSOL Multiphysics before attending. AltaSim’s instructors will draw on their experience as COMSOL Certified Consultants solving a wide range of problems on a daily basis to teach you the practical aspects of performing realistic analysis of electromagnetic problems. The course will introduce the fundamental governing Maxwell equation for electromagnetic wave propagation and how they are implemented in COMSOL Multiphysics. Participants will understand the important material properties required for accurate simulation of RF electromagnetic phenomena and how they are used. The unique boundary conditions and mesh refinements required for RF electromagnetic analyses will be discussed in detail. Specific application to a range of wave propagation modes will be presented and supplemented by demonstration for different conditions of interest to engineers developing RF electromagnetic analyses. On completion you will be proficient in setting up and solving analyses of a wide range of electromagnetic wave phenomena using COMSOL Multiphysics.
The cost of this two-day course is $1350 per person.
Who should attend Electromagnetics in COMSOL Multiphysics (RF)
Electromagnetics in COMSOL Multiphysics (RF) is intended for people who wish to analyze electromagnetic wave phenomena using COMSOL Multiphysics. It is expected that attendees will have an existing knowledge of the structure of COMSOL Multiphysics and will possess a relevant engineering, physics, mathematics or science background.
Day 1, 9:00am – 5:00pm
An initial overview will be provided of the governing equations of electromagnetic wave propagation and the relevant material properties required for numerical analysis. Detailed consideration will be given to the selection and implementation of the relevant boundary conditions required for accurate analysis. At the end of Day 1 participants will have an understanding of the following items:
- Fundamental governing equations of electromagnetic wave phenomena
- Required material properties
- Selection of general boundary conditions for electric and magnetic field
- Best practices for selection of mesh refinement
- Application of perfectly matched layers
- Calculation of critical parameters in the analysis of electromagnetic waves
Day 2, 9:00am – 5:00pm
The second day will extend the content of Day 1 by applying analysis of electromagnetic using COMSOL Multiphysics to a range of relevant application commonly encountered in analyzing electromagnetic phenomena. At the end of Day 2 participants will have an understanding of the following items:
- Wave propagation under a variety of situations
- Analysis of wave propagation using waveguides and transmission lines
- Electromagnetic wave radiation
- Analysis of electromagnetic scattering and diffraction
Instruction will be performed by experienced engineers who use COMSOL Multiphysics on a daily basis to solve real world problems. Among the instructors will be:
Sergei has over thirty years experience in computational analysis and specializes in analysis of problems relating to electromagnetic, vibration, plasma and acoustic phenomena, structural, piezo-electric, and heat transfer. As a Senior Engineer at AltaSim he has been instrumental in the development and application of multiphysics analysis to problems in the Automotive, Aerospace, Medical Products, Consumer Products, and Energy markets.
With over four years of computational analysis experience, Josh has a graduate level training in computational mechanics modeling specializing in microstructural analysis. As a Research Engineer at AltaSim, he plays a vital role in developing solutions to a wide range of multiphysics problems using COMSOL. He has been integral to the development and teaching of both COMSOL Multiphysics and SpaceClaim courses at AltaSim.
For registration and further information please e-mail firstname.lastname@example.org or call Jeff Crompton 614 861 7015 x11. Early registration is encouraged as the number of participants is limited.
Upon registration you will receive an e-mail confirmation of your reservation, directions to the course site and information on local accommodation.
Training will take place between 9.00am and 5.00pm, check-in is open from 8.30am on the first day.. Lunch and refreshments during the morning and afternoon sessions are provided.
Payment should be provided in advance and can be made by Visa, MasterCard, PayPal, company purchase order or check. For security purposes we do not accept credit card information by e-mail, but we have an electronic payment system for your convenience.
Please mail payments/purchase orders to:
130 East Wilson Bridge Rd, Suite 140
Columbus, OH 43085
Please fax purchase orders to:
614 861 7534